Precise control

· Dual IR sensor, not affected by temperature and humidity, more precise control of Co2 concentration.
· Environment Fuselage six-sided heating wire, three independent heating units, through PID control to ensure high precision and stable temperature  environment.
· Chamber temperature accuracy37+0.1℃.

 Humanized Design

· Optional open the door in both directions.
· Meet the stack design, can be placed on two layers, saving space.
· Supports external MODBUS communication protocol.
· The adjustable foot can ensure the stable placement of the device on the uneven ground.

 Intelligent management

· 7 inch touch screen: Real-time display of parameters and curves intuitively understand the device operating status.
· Set three level user management rights, standard data tracking function.
· Industrial PLC controlled customized culture program: up to 4 sets of parameters, each set of 9 stages, to meet the needs of customized cell culture.
· Standard USB interface, easy data storage and export.
· Resistance screen design can wear gloves to operate.
· The inner liner adopts stainless steel integrated rounded corner design, which is Anti-corrosion and easy cleaning.
· With a access port and gas acquisition port, it can detect the situation in the cabinet in real time.

 Sterilization

· The standard UV lamp can irradiate to the water tray and the entire air duct to kill the mold in the circulating air in the cabinet and the water steam in the humidifying tray.
· Unique air duct design, so that the air can be gently circulated in the cabinet.
· CO2 and N2 intake valves are equipped with HEPA filters to effectively filter bacteria and dust particles.
· When the door is opened, the fan will automatically stop and the air valve will automatically close to prevent pollution and ensure the cell culture state.
 

Parameter
External Dimensions (WxD x H)	620× 772 × 907 mm
Internal Dimensions (Wx D xH)	490 × 525× 666 mm
Volume	170L
Net weight	100kg
Performance
Temperature control  range	AT+5~50℃
Temperature Uniformity	±0.25℃（AT：22°C、Settings：37°C、CO2：5%、no load ）
Temperature Fluctuation	±0.1°C（AT：22°C、Settings：37°C、CO2：5%、no load ）
CO2 concentration control method	PID
Display	7 inch LCD
CO2 sensor	IR sensor
CO2 Control Range	0 ~ 20 %
CO2 Fluctuation	±0.15 %（AT：22°C、Settings：37°C、CO2：5%、no load ）
Ambient temperature	5~35℃
Heating method	Direct Heat & Air Jacket System
Humidification method	Natural evaporation of water in the tray
Humidification method	95±5%
Noise Level  (db)	≤45dB（A）
Sterilization method	UV lamp 4W×1
Circulation method	Air stirring type
O2 concentration control method	None
O2 sensor	None
O2 Control Range	None
O2 Fluctuation	None
Pull up and pull down
Temperature and carbon dioxide concentration recovery curve 30s +60s after opening the door
Construction
Exterior Material	Painted Steel
Interior Material	SUS304 steel
Insulation materials	PUF
Heating wire	——
Outer Doors/Lid	Painted Steel
Outer Door Lock	Optional
Inner Doors/Lid	Tempered glass
Tray material	SUS304
Tray deminsion	469*444*9mm
Tray number	4pcs
Filter	0.3um efficiency: more than 99.97%
CO2 connection port	Pagoda connector
CO2 connection port	——
Controller
Temp sensor	Dual IR sensor
HS controller	——
Accuracy value	0.1
UV lamp	4W×1
Access Port	1
Access Port Position	Back
Access Port Diameter	30mm
Casters	Adjustable feet
Alarm(V=Visual Alarm, B=Buzzer Alarm, R=Remote Alarm)
CO2 concentration exceeds upper limit alarm	V-B-R
CO2 concentration exceeds lower limit alarm	V-B-R
Door open alarm	V-B-R
Alarm for empty CO2 cylinder or CO2 solenoid valve failure	V-B-R
UV lamp alarm	V-B-R
Ambient temperature sensor failure	V-B-R
High temperature protection sensor failure in the box	V-B-R
High temperature alarm inside the box	V-B-R
Low temperature alarm inside the box	V-B-R
High temperature protection alarm inside the box	V-B-R
Electrical
Power Supply(V)	220~240V
Frequency(Hz)	50
Rated input power	330W
Power consumption	1.4kW▪h/24h
Standard Accessories
Accessories	Tray×4、gas pipe×1、gas pipe clip×2、humidification tray×1、stacking board×1、wear pad×2、M4 screw×4、M5 gasket×4、M8 gasket×4
Options
Options	Platform trolley
	Electronic lock
Communication Systems
Standard port	——
Optional port	RS485、USB
Quality Management System
Certification	CE, ISO13485, ISO9001, ISO14001